Text is everywhere in a CAD drawing: room names, component numbers, material notes, instructions and general specifications. GstarCAD provides two main ways to create this information: TEXT and MTEXT. They can look almost identical on screen, but they behave very differently when you edit, format or reorganise the drawing. The practical rule is simple: use TEXT for short independent labels and MTEXT for paragraphs or formatted notes.
What is the main difference between TEXT and MTEXT?
| Feature | TEXT | MTEXT |
|---|---|---|
| Object type | Single-line text | Multiline text |
| Best for | Short labels and IDs | Notes and paragraphs |
| Multiple lines | Each line is a separate object | Several lines form one object |
| Word wrapping | No paragraph wrapping | Yes, according to text-box width |
| Formatting | Primarily controlled by text style and properties | Supports richer character and paragraph formatting |
| Line spacing | Managed as separate text objects | Controlled within the MTEXT object |
| Columns | No | Available |
When should you use TEXT?
TEXT creates single-line text objects. You specify a position, height and rotation, then enter the required text.
You can continue entering additional lines during the same command, but each line remains an independent text object. This is what makes TEXT useful for short pieces of information that should be selected and edited separately.
Typical examples include:
- room numbers such as
201,202and203, - grid labels such as
A,BandC, - component identifiers such as
P-101, - short material labels,
- simple one-line drawing notes.
- Type
TEXTand press Enter. - Specify the text insertion point.
- Enter the required height if prompted.
- Specify the rotation angle.
- Enter the text.
Use TEXT for independent information
If every label may need to be moved, copied or edited separately, individual TEXT objects are often the simplest solution.
When should you use MTEXT?
MTEXT creates a multiline text object inside a defined text area. Instead of treating every line as a separate entity, GstarCAD stores the complete paragraph or group of lines as one object.
After running MTEXT, define the text area by specifying its corners. GstarCAD then opens the text editor where you can enter and format the content.
MTEXT is particularly useful for:
- general drawing notes,
- installation instructions,
- technical specifications,
- long descriptions,
- multiline remarks,
- formatted lists and paragraphs.
MTEXT also provides controls for text width, justification, line spacing, rotation and columns. Within the editor, individual words or characters can also receive additional formatting.
- Type
MTEXTand press Enter. - Specify the first corner of the text area.
- Specify the opposite corner to define its width.
- Enter the required text in the editor.
- Apply paragraph or character formatting where necessary.
- Finish the editor to create the MTEXT object.
Why does the text-box width matter?
The width of an MTEXT object controls how the paragraph wraps. If you make the text box narrower, the same text flows onto more lines. Make it wider and the paragraph occupies fewer lines.
This is very useful when arranging notes beside a drawing because you can change their layout without manually creating and repositioning separate lines of text.
With TEXT, each line is independent, so reorganising a long paragraph can require significantly more manual editing.
What role does STYLE play?
Whether you use TEXT or MTEXT, you should still create consistent text standards with STYLE. A text style can define properties such as the font, text height, width factor and oblique angle.
For office drawings, it is better to create named styles such as OFFICE-TEXT or NOTES than to manually change fonts on individual text objects.
If you are setting up drawing standards from scratch, see our project setup guide for a workflow covering layers, text styles, dimension styles and reusable templates.
Avoid unnecessary local formatting
MTEXT allows individual words and characters to have different formatting, but use this deliberately. Too many manual overrides can make office standards harder to maintain than a consistent text-style workflow.
Practical example: annotate an architectural floor plan
Suppose you are preparing an office floor plan containing twenty rooms plus a general construction note.
Each room needs a short identifier such as:
OFFICE 201
OFFICE 202
MEETING 203
These labels need to be positioned independently inside different rooms. TEXT is a good choice because every label is short and may need to be moved individually.
The same drawing also contains this note:
All dimensions must be checked on site before construction. Do not scale dimensions from the drawing. Report discrepancies to the project designer before commencing work.
This information belongs together as one paragraph. Creating every line as a separate TEXT object would make later editing unnecessarily difficult. Use MTEXT instead so the note remains one object and automatically reflows when its width changes.
What if you already have many TEXT objects?
Older drawings often contain notes constructed from many separate single-line text objects. If those lines should really form one paragraph, GstarCAD provides TXT2MTXT.
- Run
TXT2MTXT. - Select the single-line text objects that belong together.
- Press Enter.
- GstarCAD combines the selected text into a multiline text object.
- Edit the resulting MTEXT width and formatting as required.
This can make inherited drawings much easier to edit without manually recreating long notes.
Which text command should you choose?
Use TEXT when the information is short, independent and likely to be edited or positioned individually. Use MTEXT when several lines belong together as one note, especially when wrapping, paragraph alignment or richer formatting is required.
The easiest way to remember the difference is: TEXT is a label; MTEXT is a paragraph. Choosing the correct object type at the beginning makes drawing annotations easier to edit, align and standardise later.