Tips & Tricks

MEASUREGEOM: One Command for Length, Area, Distance, Angle and Volume

Measure total lengths, combined areas, distances, angles and 3D volumes quickly with GstarCAD’s powerful MEASUREGEOM command.

Level
Beginner
Best for
Quick checks, quantity take-offs and drawing analysis
Commands
MEASUREGEOM
Topic
Productivity

How long are all the pipes in this drawing? What is the combined floor area of these six rooms? What is the volume of this 3D component? These questions often lead CAD users to measure objects one by one and then calculate the totals manually. GstarCAD provides a much faster solution with MEASUREGEOM. The command brings several geometry-query tools together in one place and also includes powerful Total Length and Total Area options for analysing multiple objects at once.

What is MEASUREGEOM?

MEASUREGEOM is an inquiry command. It reads geometry from your drawing and reports measurements without changing the objects themselves.

Type MEASUREGEOM or its shortcut MEA and GstarCAD provides several measurement options:

OptionWhat it measuresTypical use
DistanceDistance between selected pointsChecking clearances and dimensions
RadiusRadius and diameterChecking circles and arcs
AngleAngle between geometryChecking slopes and intersections
AreaArea and perimeterRooms, slabs and enclosed zones
VolumeVolume of 3D geometryMaterial and capacity checks
Total AreaCombined area of multiple closed objectsQuantity take-offs
Total LengthCombined length of multiple curvesPipes, cables, kerbs and routes

This makes MEASUREGEOM more than a simple measuring tool. It can also be used as a fast drawing-analysis and quantity take-off command.

Why use MEASUREGEOM instead of measuring manually?

The biggest advantage is that you do not always need to measure objects individually and transfer the values to a calculator. If your drawing already contains the correct geometry, GstarCAD can use that geometry directly.

This is especially valuable when a project contains dozens or hundreds of objects. Instead of reading every polyline length separately, you can select the required objects and obtain their combined length directly from the command line.

Important

MEASUREGEOM reports values using the units of your drawing. If your drawing is created in millimetres, lengths will be based on millimetres, areas on square millimetres and volumes on cubic millimetres. Convert the result where necessary for metres, square metres or cubic metres.

Example 1: Calculate the total length of selected lines and curves

This is one of the most useful features of GstarCAD’s measurement tools. Imagine an electrical plan containing cable routes drawn as a mixture of lines, polylines and curved sections. You need to know the total cable length.

Measuring each object separately would be slow and introduces the risk of calculation errors.

  1. Type MEASUREGEOM and press Enter.
  2. Select the Total Length option or enter T.
  3. Select the required lines and curves individually, or use a selection window.
  4. Press Enter when the selection is complete.
  5. Read the total length from the command line.

GstarCAD can include geometry such as lines, circles, polylines, ellipses and spline curves in the calculation.

For example, suppose the selected cable routes have individual lengths of 12400, 8600, 15250 and 9750 mm. Instead of adding them manually, Total Length gives you the combined result directly:

Total length = 46000

If the drawing uses millimetres, that corresponds to 46 m of cable.

Practical workflow

If you only need objects from one system, such as electrical cables or heating pipes, isolate the relevant layer first. Then use Total Length to select the visible geometry without accidentally including unrelated objects.

Where is Total Length useful?

The same workflow can be used for many real projects:

  • electrical cable routes,
  • water and heating pipes,
  • road kerbs and barriers,
  • fences,
  • floor or wall trims,
  • ductwork centre-lines,
  • landscape boundaries,
  • CNC cutting paths.

The geometry does not have to be one continuous polyline. That is what makes Total Length especially useful.

Example 2: Calculate the combined area of several rooms

Now imagine an office floor plan where six rooms will receive the same floor finish. Each room already has a closed boundary and you need the total flooring area for a quantity estimate.

You could measure each room separately with AREA and then add the values, but Total Area makes the process much quicker.

  1. Start MEASUREGEOM.
  2. Choose Total Area.
  3. Select the closed room boundaries that should be included.
  4. Complete the selection.
  5. Read the combined area from the command line.

For example, six offices may have areas of 18.5, 22.4, 19.8, 27.1, 24.6 and 30.4 m².

Instead of calculating these separately, Total Area can give you the combined result of:

Total area = 142.8 m²

This is useful for flooring, paint zones, roofing areas, landscaping, paving or any other quantity based on several enclosed regions.

Watch out

For reliable area calculations, make sure the boundaries are properly closed. Small gaps or incorrect geometry can prevent an area from being recognised correctly.

Example 3: Check the volume of a 3D solid

MEASUREGEOM is not limited to 2D drawings. The Volume option is useful when working with 3D solids.

Suppose you model a concrete base measuring 1000 × 600 × 80 mm and want to confirm its material volume.

  1. Run MEASUREGEOM.
  2. Select Volume.
  3. Choose the 3D solid.
  4. Read the calculated volume.

For this simple example the volume is:

1000 × 600 × 80 = 48,000,000 mm³

This equals 0.048 m³.

For a simple box you could calculate this manually, but the real advantage appears with irregular 3D solids containing holes, cut-outs, fillets or other modifications. The CAD model already knows its geometry, so you can query the resulting volume directly.

What about Distance, Radius and Angle?

The same command also replaces several common one-off checks. Use Distance to inspect the separation between two points, Radius to check a circle or arc, and Angle to verify the relationship between lines or curved geometry.

This makes MEASUREGEOM useful during both drawing creation and final checking. You can inspect geometry without creating permanent dimensions or modifying the drawing.

MEASUREGEOM or dimensions: what is the difference?

A dimension is part of the drawing and is normally intended to communicate a measurement to someone reading or printing the document.

MEASUREGEOM is different. It is an inquiry tool. Use it when you need information about the geometry yourself but do not need to place that measurement permanently on the drawing.

NeedBetter choice
Quickly check a distanceMEASUREGEOM
Add a measurement to the drawingDimension command
Add lengths of many curvesMEASUREGEOM Total Length
Add areas of several zonesMEASUREGEOM Total Area
Check a 3D solid’s volumeMEASUREGEOM Volume

Why should MEASUREGEOM be part of your everyday workflow?

The strength of MEASUREGEOM is not only that it measures geometry. It can turn geometry that already exists in your DWG into useful project information.

For a quick check, use Distance, Radius or Angle. For individual closed geometry, use Area. For 3D work, use Volume. And when the question is “How much is there altogether?”, use Total Length or Total Area.

The productivity rule is simple: do not measure ten objects separately if GstarCAD can calculate their total directly.

All tips Updated 16 October 2026
Continue learning
View all tips

Ready to switch to GstarCAD?

Get personalized advice on licensing, migration, and deployment for your business.

Contact us Buy now

No obligation — reply within 24h

Your Cart

Subtotal

Price does not include local taxes or duties.

Proceed to Checkout

Cookie preferences

Choose which cookies you want to allow. Essential and payment cookies cannot be disabled as they are required for the site to function.

Essential

Required

Core functionality including authentication, shopping cart, and language preferences.

Payment

Required

Required for processing payments securely through Stripe and PayPal.

Analytics

Help us understand how visitors interact with our site to improve the experience.

Marketing

Used to deliver relevant advertisements and measure campaign performance.

Functional

Order attribution and traffic source tracking to help us understand how customers find our store.