Tips & Tricks

Master CAD Viewports: How to Use VPMAX, VPMIN, VPOINT, and VPSCALE

Work faster with layout viewports using VPMAX and VPMIN, control viewing direction with VPOINT and verify viewport scales with VPSCALE.

Level
Intermediate
Best for
Layouts, scaled drawings and multi-view sheets
Commands
VPMAXVPMINVPOINTVPSCALE

Layout viewports are one of the most powerful parts of a CAD drawing, but they can also become frustrating when you constantly zoom through small viewport windows, accidentally change a scale or struggle to check which view is actually being displayed. GstarCAD includes several useful commands that make viewport work faster and safer. VPMAX and VPMIN improve editing inside layout viewports, VPSCALE verifies their actual scale, while VPOINT controls the viewing direction when working with 3D or differently oriented views.

What do these viewport commands actually do?

Although all four commands relate to views, they solve very different problems.

CommandWhat it doesBest use
VPMAXMaximises a layout viewport and switches into its Model Space viewEditing geometry through a small viewport
VPMINReturns a maximised viewport to the normal layoutReturning to sheet composition
VPOINTChanges the viewing direction3D, isometric and custom views
VPSCALEReports the actual scale of a layout viewportChecking plotting and viewport scales

Why is VPMAX so useful?

Imagine an A1 layout containing four viewports. One small detail viewport shows an area that needs editing. Normally, you might double-click inside that small viewport and then zoom and pan while trying to work within its limited screen area.

VPMAX provides a much better workflow. It temporarily expands the selected layout viewport to fill the drawing area and switches you into Model Space for editing, while preserving the viewport’s layout scale and limits.

  1. Open the required Layout.
  2. Select the viewport or make it active.
  3. Type VPMAX and press Enter.
  4. If required, select the viewport to maximise.
  5. Edit the model using the full drawing area.

The result feels similar to working directly in Model Space, but you are still working through the selected layout viewport.

Tip

VPMAX is especially useful for sheets containing many small detail viewports. Instead of repeatedly zooming into tiny windows, maximise the one you need, edit comfortably and return to the layout afterwards.

How do you return with VPMIN?

When the editing work is finished, type VPMIN. GstarCAD exits the maximised viewport state and returns you to the original layout.

Command: VPMIN ↵

You can therefore think of the two commands as a pair:

VPMAX → edit comfortably → VPMIN → continue arranging the sheet.

GstarCAD also allows the maximised state to be entered and exited using viewport controls in the interface, but knowing the commands is often faster once they become part of your workflow.

What does VPSCALE tell you?

VPSCALE answers a very important question: “What scale is this viewport actually using?”

The command reports the real scale of the current viewport or of a selected layout viewport. It does not change the viewport scale; it simply tells you what the scale currently is.

  1. Go to the Layout containing the viewport.
  2. Type VPSCALE and press Enter.
  3. Select the edge of the viewport when prompted.
  4. Read the reported scale in the command line.

This is particularly useful when you receive an existing DWG containing several viewports and need to check whether a floor plan is really at 1:50, a site plan at 1:500 or a detail at 1:10.

Watch out

VPSCALE reports the viewport scale; it does not set it. If the reported value is wrong, adjust the viewport scale using the appropriate layout viewport scale controls and check it again.

Where does VPOINT fit into viewport work?

VPOINT solves a different problem. Instead of controlling viewport size or plotting scale, it controls the direction from which the model is viewed.

This becomes useful when one layout contains several views of the same 3D model. One viewport may show a top view, another an isometric view and another a custom direction.

  1. Activate the viewport whose view you want to change.
  2. Type VPOINT and press Enter.
  3. Define the required viewing direction or use the available viewing options.
  4. Check the resulting model orientation.

The important distinction is that VPOINT changes how you look at the model, while the viewport scale determines how large that view appears on the sheet.

Practical example: working on a multi-view mechanical sheet

Suppose an A3 layout contains a front view at 1:10, an isometric view and a small detail at 1:2.

You first need to modify geometry visible through the small detail viewport. Select it and use VPMAX so the viewport fills the screen. Make the required changes to the model and then use VPMIN to return to the sheet.

Next, run VPSCALE and select the detail viewport edge. Confirm that its actual scale is still 1:2. Then activate the isometric viewport and use VPOINT if its viewing direction needs to be changed.

Instead of treating every viewport as a simple rectangular hole into Model Space, you are now managing three separate things deliberately: editing access, viewing direction and plotting scale.

What is the best viewport workflow?

A good layout workflow separates the model from its presentation. Draw the geometry correctly in Model Space, then use layout viewports to control how that geometry appears on each sheet.

Use VPMAX when a viewport is too small for comfortable editing and VPMIN when you are ready to return to the layout. Use VPOINT when the viewing direction itself needs to change, particularly for 3D views. Finally, use VPSCALE as a quick verification tool whenever correct printed scale matters.

The productivity rule is simple: VPMAX/VPMIN control how you work through the viewport, VPOINT controls what direction you see, and VPSCALE confirms how large that view will be represented on the sheet.

All tips Updated 6 October 2026
Continue learning
View all tips

Ready to switch to GstarCAD?

Get personalized advice on licensing, migration, and deployment for your business.

Contact us Buy now

No obligation — reply within 24h

Your Cart

Subtotal

Price does not include local taxes or duties.

Proceed to Checkout

Cookie preferences

Choose which cookies you want to allow. Essential and payment cookies cannot be disabled as they are required for the site to function.

Essential

Required

Core functionality including authentication, shopping cart, and language preferences.

Payment

Required

Required for processing payments securely through Stripe and PayPal.

Analytics

Help us understand how visitors interact with our site to improve the experience.

Marketing

Used to deliver relevant advertisements and measure campaign performance.

Functional

Order attribution and traffic source tracking to help us understand how customers find our store.