Starting a CAD project should involve more than opening an empty DWG and immediately drawing geometry. A few minutes spent configuring drafting settings, layers, text and dimensions can prevent hours of inconsistent formatting later. In GstarCAD, these standards can be prepared once and saved inside a reusable DWT drawing template. The result is a project environment where every new drawing starts with the same organised structure.
What should you configure before you start drawing?
A useful project setup normally covers several different areas:
| Setting | Main command | Why it matters |
|---|---|---|
| Grid display | GRID | Provides a visual drawing reference |
| Cursor Snap | SNAP | Restricts cursor movement to defined increments |
| Drafting settings | DSETTINGS | Centralises Snap, Grid and other drafting aids |
| Layers | LAYER | Organises geometry by purpose and appearance |
| Text styles | STYLE | Standardises fonts and text behaviour |
| Dimension styles | DIMSTYLE | Standardises dimensions, arrows, units and text |
| Template | SAVEAS | Saves the entire setup for future projects |
How should you set up Grid and Snap?
GRID displays a regular visual reference across the drawing area. It does not become part of the drawing and does not print. You can toggle Grid display with F7.
SNAP is different. When enabled, it restricts cursor movement to defined increments. Snap can be toggled with F9.
The easiest place to configure both is DSETTINGS.
- Type
DSETTINGSand press Enter. - Open the Snap and Grid tab.
- Set the required Snap X and Y spacing.
- Set the Grid X and Y spacing.
- Enable or disable Snap and Grid as required.
- Confirm the settings.
Do not confuse Snap with Object Snap
SNAP controls cursor movement in regular increments. Object Snaps identify precise existing points such as endpoints, midpoints and centres. For most precision drafting, Object Snaps are more important than keeping Grid Snap permanently enabled.
How should you organise your layers?
Layers are one of the most important parts of a good project standard. Instead of drawing everything on Layer 0, create layers based on the function of the objects.
Run LAYER to open the Layer Properties Manager. Create the layers you expect to use and define their colours, linetypes, lineweights and plotting behaviour.
A simple architectural project might begin with:
| Layer | Typical content |
|---|---|
WALLS | Main building geometry |
DOORS | Doors and openings |
DIMENSIONS | Dimensions |
TEXT | Notes and labels |
HATCH | Material and area hatching |
GRID | Structural or reference grids |
CONSTRUCTION | Temporary construction geometry |
Where possible, keep object properties set to ByLayer. This allows colour, linetype and lineweight to be controlled centrally instead of object by object.
Tip
Create the layer structure before drawing begins. Changing one layer property later is much faster than selecting hundreds of individual objects to correct their appearance.
How should you define the text style?
Run STYLE to open the Text Style dialog. A text style can define the font, height, width factor, oblique angle and other text behaviour.
- Type
STYLEand press Enter. - Create a new style, for example OFFICE-TEXT.
- Select the approved office font.
- Set the required width factor and other properties.
- Make the style current if it will be your standard text style.
For a flexible general-purpose style, a text height of 0 is often useful because the actual height can then be specified when the text is created or controlled through an annotation style. If your office standard requires a fixed height, configure it accordingly.
How should you prepare dimension styles?
Dimensions should not be formatted individually. Use DIMSTYLE to create a standard that controls the complete dimension appearance.
A dimension style can define:
- dimension and extension lines,
- arrowhead type and size,
- text style and height,
- text position,
- unit format and precision,
- overall scale or annotative behaviour.
Create a clearly named style such as OFFICE-MM or A1-1-50, depending on your office workflow. Then test it on a real dimension before saving the template.
Practical example: prepare an architectural project template
Suppose your office regularly creates building plans in millimetres. Instead of configuring every new project from scratch, prepare one clean project file.
- Use
DSETTINGSand configure a visible Grid suitable for your work, for example1000mm major spacing. Enable Snap only when it is useful for the current drafting task. - Run
LAYERand createWALLS,DOORS,WINDOWS,TEXT,DIMENSIONS,HATCHandCONSTRUCTION. - Assign standard colours, linetypes and lineweights to those layers.
- Run
STYLEand create an OFFICE-TEXT text style using the company font. - Run
DIMSTYLEand create an OFFICE-MM dimension style with the correct arrows, text style, precision and units. - Create any standard layouts, title blocks or page setups that every project should contain.
- Remove temporary geometry so the file represents a clean starting point.
You now have a drawing containing your standards but no project-specific design information.
How do you save the project setup as a template?
A GstarCAD drawing template uses the .dwt file extension. Templates can store drawing settings such as layers, text styles, dimension styles, layouts and other predefined project standards.
- Run
SAVEASor press Ctrl + Shift + S. - Enter a clear template name, for example
Office-Architecture-MM.dwt. - Under file type, select Drawing Template (*.dwt).
- Save the template in your chosen template location.
- When starting the next project, create the new drawing from this DWT instead of an empty default drawing.
If required, the default template used for new drawings can also be configured through the application options.
Set it once, reuse it everywhere
A good template can contain your layers, text styles, dimension styles, layouts, plotting settings and other office standards. Updating the template is much more efficient than rebuilding the same project environment for every DWG.
What is the best project setup workflow?
The best order is to define the drawing environment first, then the standards that control the objects you will create. Start with DSETTINGS, Grid and Snap, organise the drawing with LAYER, establish text with STYLE and dimensions with DIMSTYLE, then test the setup on a few sample objects.
Once everything behaves correctly, save the clean file as a DWT template. The productivity principle is simple: do not configure the same CAD standards at the beginning of every project – configure them once and start every project from the template.