When something inside a block needs changing, the first instinct is often to use EXPLODE. It works, but it also removes one of the main advantages of blocks: several block references can share the same definition and stay consistent when that definition is edited. GstarCAD provides better tools for most block-editing tasks. The right choice depends on whether you want to change the complete block definition, edit it in the context of the drawing, extract only one object or reuse the block in other drawings.
Why should you avoid exploding blocks?
Exploding converts a block reference into its component objects. After that, those objects are no longer linked to the original block definition. If you later change the block, the exploded geometry will not update with the remaining block references.
This can quickly create inconsistencies. Imagine a floor plan containing 60 identical door blocks. If you explode five of them just to change a line, those five doors become independent geometry while the other 55 remain controlled by the block definition.
| What you need to do | Better tool | Why |
|---|---|---|
| Change every instance of a block | BEDIT | Edit the block definition directly |
| Edit a block while seeing surrounding geometry | REFEDIT | Edit the definition in drawing context |
| Take one object out of a block | NCOPY | Copy nested geometry without exploding |
| Save a block for use in other drawings | WBLOCK | Create a separate reusable DWG file |
| Place another instance of an existing block | INSERT | Reuse the existing block definition |
Use BEDIT when the block itself needs changing
If the block definition is wrong, edit the definition instead of breaking individual instances apart. The Block Editor gives you an isolated environment where you can modify the geometry that belongs to the block.
- Type
BEDITand press Enter. - Select the block definition you want to edit.
- Add, delete or modify the required geometry.
- Save the changes and close the Block Editor.
- Check the other references of the same block in the drawing.
Because the references share the same definition, changing the definition updates its instances throughout the drawing. This is exactly why blocks are so useful for repeated components such as doors, symbols, furniture and standard details.
Watch out
Be careful when moving the complete block geometry inside the Block Editor. The block origin is important because it controls the insertion point when the block is placed.
Use REFEDIT when you need to see the surrounding drawing
Sometimes editing the block in isolation is inconvenient. For example, you may need to extend part of a block so that it lines up precisely with nearby walls or other geometry.
This is where REFEDIT is useful. It lets you edit a block definition in place while the rest of the drawing remains visible as context.
- Type
REFEDITand press Enter. - Select the block you want to edit.
- Modify the required objects while using surrounding geometry as reference.
- Add or remove objects from the working set if required.
- Save the reference changes when finished.
A simple rule helps: use BEDIT when you want to concentrate on the block itself, and REFEDIT when the block must be edited relative to other objects in the drawing.
Need only one object from a block? Use NCOPY
Another common reason users explode blocks is to obtain one line, polyline or other object from inside them. You do not need to destroy the block for this.
NCOPY copies a nested object from a block directly into the current drawing while leaving the original block intact. It can also be useful with geometry contained in external references.
- Type
NCOPYand press Enter. - Select the required object inside the block.
- Specify a base point.
- Specify the destination point.
Tip
If you are about to explode a block only because you need one piece of its geometry, try NCOPY first. You get an independent copy while the original block remains untouched.
How can you reuse a useful block in other drawings?
A block defined with BLOCK belongs to the current drawing. If you have created a useful symbol, detail or standard component that should also be available in other projects, use WBLOCK.
WBLOCK can save selected objects or an existing block definition as a separate drawing file. That DWG can then be inserted into another drawing using INSERT.
- Type
WBLOCKand press Enter. - Choose an existing block or select the objects to save.
- Define an appropriate base point.
- Choose the file name and location.
- Save the new DWG for future use.
Practical example: changing a repeated door block
Suppose a building plan contains 40 references of a door block and you need to add an additional line to the symbol. Exploding every door would create many separate objects and make later changes difficult.
Instead, use BEDIT to modify the door definition once. All references can then use the updated definition. If the new line must align with nearby wall geometry, use REFEDIT so you can make the change while seeing the floor plan. If you only need one existing line from inside the door block for another detail, use NCOPY. Finally, if the finished door should become part of your standard block library, save it to a separate DWG with WBLOCK.
When is EXPLODE actually appropriate?
EXPLODE is not a bad command. Use it when you genuinely want the components to become independent objects and no longer need the advantages of the block definition. The important point is not to use it simply because you need to make a small edit.
Before exploding a block, ask what you are actually trying to achieve: edit it, edit it in context, extract one object or reuse it elsewhere? In most cases, BEDIT, REFEDIT, NCOPY or WBLOCK gives you a cleaner and more reusable result.