What does STRETCH do?
STRETCH changes the shape or size of drawing geometry by moving selected vertices and endpoints while leaving the rest of the object in place. It is especially useful when you need to make part of a plan longer, shorter or wider without redrawing connected geometry. Objects completely included in the selection are moved rather than stretched.
How to use the command
- Type
STRETCHor its shortcut S, then press Enter. - Create a crossing window from right to left around the vertices or endpoints that you want to move.
- Press Enter to confirm the selection.
- Specify a base point for the stretch operation.
- Specify the second point, or enter a displacement, to define the distance and direction of the change.
Command: S ↵
Select objects: crossing window around endpoints ↵
Select objects: Enter
Specify base point or [Displacement] <Displacement>: pick base point
Specify second point or <use first point as displacement>: 500,0 ↵
Key STRETCH options
The result depends mainly on how the objects are selected and how the displacement is defined.
Practical example: increase the width of a room
Suppose a rectangular room is 4000 mm wide and needs to become 4500 mm wide while the left-hand wall remains fixed. Start STRETCH and create a crossing window around the right-hand wall and the endpoints of the connected top and bottom walls. Confirm the selection, choose a base point and specify a horizontal displacement of 500 mm. The selected wall moves by 500 mm and the connected walls stretch to meet its new position.
Tip
The selection method is critical with STRETCH. Include only the vertices or endpoints that should move. If an entire object is included in the crossing selection, GstarCAD moves that object instead of changing its shape.