What does MASSPROP do?
MASSPROP calculates detailed geometric and mass properties of selected 3D solids or regions. It is useful for checking values such as volume, area, centroid, bounding box and moments of inertia directly from the drawing.
For 3D solids, GstarCAD assumes a uniform density of 1, so the reported mass has the same numerical value as the volume. The calculated properties are based on the current coordinate system.
How to use the command
- Type
MASSPROP, then press Enter. - Select one or more 3D solids or suitable regions.
- Press Enter to complete the selection.
- GstarCAD calculates and displays the available mass and geometric properties.
- If required, save the analysis results to an
.mprfile for later reference.
Command: MASSPROP ↵
Select objects: select 3D solid ↵
Key MASSPROP results
The information displayed depends on whether you analyse a 3D solid or a region.
Practical example: check the volume of a solid
Suppose you have a rectangular solid measuring 100 × 60 × 20 mm. Run MASSPROP, select the solid and press Enter.
GstarCAD reports a volume of 120000 cubic drawing units together with the centroid, bounding box, moments of inertia and other available properties. If the solid starts at coordinate 0,0,0, its centroid is located at 50,30,10.
Tip
Use MASSPROP when you need more information than a simple volume or area measurement. Save the results to an .mpr file when you need a permanent analysis record.