What does INTERFERE do?
INTERFERE checks 3D solids for overlapping volumes. It is useful for finding collisions between components in an assembly, such as pipes passing through structural elements or mechanical parts occupying the same space.
GstarCAD highlights each detected overlap using a temporary 3D solid. You can review the interference pairs individually and choose whether the generated interference objects should be retained or deleted.
How to use the command
- Type
INTERFEREor its shortcut INF, then press Enter. - Select the first set of 3D solids and press Enter.
- Select a second set to compare against the first, or check the objects within the first set against each other.
- Press Enter to start the interference test.
- Use the Interference Checking dialog box to review the detected overlapping volumes.
Command: INF ↵
Select first set of objects or [Nested selection/Settings]: select solids ↵
Select second set of objects or [Nested selection/checK first set]: select solids ↵
Key INTERFERE options
The command provides controls for selecting objects and reviewing detected collisions.
Practical example: check a pipe passing through a beam
Suppose a cylindrical pipe passes through a structural beam and you need to determine whether the two solids collide. Run INTERFERE, select the beam as the first set and the pipe as the second set.
GstarCAD detects the shared volume and highlights it as an interference object. Use Next and Previous in the Interference Checking dialog box to inspect detected collisions and Zoom to pair to focus on each problem area.
Tip
Use INTERFERE to find unwanted collisions before modifying the model. Use INTERSECT when you actually want to create permanent geometry from the overlapping volume.