What does IMPRINT do?
IMPRINT transfers the shape of intersecting geometry onto a 3D solid or surface and creates additional edges on its faces. The command is useful when you need to divide or mark a face using existing drawing geometry without changing the overall size of the 3D object.
The object used for the imprint must intersect one or more faces of the selected solid or surface. Supported imprint geometry includes lines, arcs, circles, polylines, ellipses, splines, regions and other suitable 3D objects.
How to use the command
- Create the geometry that you want to imprint and position it so that it intersects the target face.
- Type
IMPRINT, then press Enter. - Select the 3D solid or surface that will receive the imprint.
- Select the object whose shape you want to imprint.
- Choose whether the source object should be deleted after the imprint is created.
Command: IMPRINT ↵
Select a 3D solid or surface: select solid
Select an object to imprint: select circle
Delete the source object [Yes/No] <N>: No ↵
Key IMPRINT options
The command has a simple workflow based on selecting the target object and the geometry used to create the new edges.
Practical example: imprint a circle onto a solid
Suppose you have a rectangular solid measuring 100 × 60 × 20 mm and want to create a circular boundary on its top face. Draw a circle with a diameter of 30 mm directly on the face.
Run IMPRINT, select the solid and then select the circle. Choose No when asked whether to delete the source object. GstarCAD creates a circular edge on the solid face while retaining the original circle.
Tip
If the imprint is not created, check that the source geometry actually intersects the selected solid or surface. Geometry that does not touch a face cannot be imprinted.