What does FLATTEN do?
FLATTEN converts selected 3D geometry into a 2D representation. It can also be used to correct drawing objects that have unwanted Z coordinates by forcing their elevation and thickness values to 0.
The command is particularly useful for drawings imported from other applications or files where lines, arcs and polylines appear to be 2D but actually lie at different elevations.
How to use the command
- Set the drawing to the required view before flattening the geometry.
- Type
FLATTEN, then press Enter. - Select the objects that you want to convert to 2D.
- Press Enter to complete the selection.
- GstarCAD creates the flattened representation and sets the relevant elevation and thickness values to
0.
Command: FLATTEN ↵
Select objects to convert to 2d...
Select object: select objects ↵
Key FLATTEN results
FLATTEN is a straightforward Express Tool whose main purpose is to remove unwanted depth from selected drawing geometry.
Practical example: correct lines with different elevations
Suppose an imported floor plan contains lines and polylines that should all lie on the same 2D plane, but some objects have Z coordinates of 15, -5 or 30 mm. This can make object snaps and normal 2D editing more difficult.
Run FLATTEN, select the affected geometry and complete the command. GstarCAD converts the selected objects to a 2D representation and resets their elevation and thickness to 0, placing the geometry on a common flat plane.
Tip
Use FLATTEN to repair unwanted Z values in a 2D drawing. Use FLATSHOT instead when you want to create a separate 2D projected view of a 3D model.