What does FLATSHOT do?
FLATSHOT creates a 2D representation of the visible 3D geometry based on the current viewing direction. Edges of 3D solids, surfaces and meshes are projected onto a plane parallel to the current view and converted into 2D geometry.
The resulting flattened view can be inserted into the drawing as a block, used to replace an existing block or exported to a separate drawing file.
How to use the command
- Set the 3D model to the viewing direction that you want to convert into a 2D drawing.
- Type
FLATSHOTor its shortcut FSHOT, then press Enter. - In the FlatShot dialog box, choose the required destination and line display settings.
- Click Create.
- Specify the insertion point, scale and rotation for the resulting 2D block.
Command: FSHOT ↵
FlatShot dialog: Insert As New Block
Foreground lines: set colour and linetype
Obscured lines: set visibility and linetype
Create: click Create
Specify insertion point: pick insertion point
Key FLATSHOT options
The FlatShot dialog box controls where the flattened view is created and how visible and hidden edges appear.
Practical example: create a 2D view of a mechanical part
Suppose you have finished a 3D mechanical component and need a clean isometric view for a 2D drawing. Rotate the model until the required isometric orientation is visible, then run FLATSHOT.
Choose Insert As New Block, configure the foreground and obscured lines and click Create. Place the resulting block on the drawing. The 2D representation follows the exact viewing direction that was active when FLATSHOT was started.
Tip
Set the view carefully before running FLATSHOT. The generated 2D geometry is based directly on the current 3D viewing direction.