What does FILLET do?
FILLET creates a rounded corner between two objects by connecting them with a tangent arc of a specified radius. Depending on the selected objects and settings, GstarCAD can trim or extend the original geometry so that it meets the new fillet arc correctly. The command is commonly used for mechanical details, architectural corners and other geometry that requires smooth transitions.
How to use the command
- Type
FILLETor its shortcut F, then press Enter. - Choose Radius if you need to change the current fillet radius.
- Enter the required radius and press Enter.
- Select the first object near the corner that you want to modify.
- Select the second object. GstarCAD creates the tangent fillet between the selected objects.
Command: F ↵
Select first object or [Undo/Polyline/Radius/Trim/Reverse/Multiple]: R ↵
Specify fillet radius: 50 ↵
Select first object or [Undo/Polyline/Radius/Trim/Reverse/Multiple]: select first line
Select second object: select second line
Key FILLET options
The main options control the fillet radius and how the selected geometry is modified.
Practical example: round a plate corner
Suppose two perpendicular edges of a plate meet at a sharp corner and the design requires a radius of 50 mm. Start FILLET, choose Radius and enter 50. Select the first edge and then the second edge near their intersection. GstarCAD trims the edges as required and inserts a tangent arc with a radius of 50 mm, producing a smooth rounded corner.
Tip
Set the fillet radius to 0 when you want two lines to meet at a sharp corner. GstarCAD trims or extends the selected objects until they intersect without creating a fillet arc.