GstarCAD command

EXOFFSET command

Create parallel and concentric CAD geometry with extended offset controls for distance, layers, corner handling and multiple operations.

Command
EXOFFSET
Alias
—
Tool group
Modify
Level
Intermediate

What does EXOFFSET do?

The EXOFFSET command is an enhanced version of the standard OFFSET command in GstarCAD. It creates parallel lines, concentric shapes and offset curves while providing additional control over layers and corner handling. This Express Tool is useful when creating wall outlines, mechanical profiles and other geometry that requires consistent spacing.

How to use the command

  1. Type EXOFFSET and press Enter, or select Express > Modify > Extended Offset.
  2. Enter the required offset distance, or choose Through to specify a point.
  3. Select the line, arc, circle or other supported object you want to offset.
  4. Specify the side where the new geometry should be created.
  5. Use Options to change the distance, target layer or corner handling.
  6. Continue selecting objects to create additional offsets without restarting the command.
  7. Press Enter to finish when all offsets have been created.
Command: EXOFFSET ↵
Specify offset distance or [Through] <Through>: 150 ↵
Select object(s) to offset or [Options/Undo]: select wall centreline
Specify side to offset: click left side
Select object(s) to offset or [Options/Undo]: O ↵
Specify an option to set [Distance/Layer/Gaptype]: L ↵
Layer setting: Current Layer
Select object(s) to offset or [Options/Undo]: Enter ↵

Key EXOFFSET options

The extended offset controls provide flexibility when creating parallel geometry and managing drawing properties.

Distance
Specifies the offset distance used to create parallel or concentric geometry.
Through
Creates offset geometry through a specified point instead of using a fixed distance.
Layer
Places new offset objects on either the current drawing layer or the original object’s layer.
GapType
Controls how gaps at polyline corners are handled using the OFFSETGAPTYPE system variable.
Normal
Uses normal corner handling when offsetting connected polyline segments.
Fillet
Connects offset polyline segments with rounded corners where applicable.
Chamfer
Connects offset polyline segments with straight chamfered corners.
Undo
Reverses the previous offset operation without leaving the command.

Practical example: creating architectural wall outlines

Suppose an architectural floor plan contains a wall centreline and the required wall thickness is 300 mm. Start EXOFFSET and enter an offset distance of 150.

Select the centreline and create an offset on one side. Repeat on the opposite side to produce two parallel wall faces separated by 300 mm.

If the wall outlines must belong to a dedicated layer, use the Layer option and select Current Layer after making the appropriate layer current.

Tip

Use GapType when offsetting polylines with corners. Choose Fillet for rounded connections or Chamfer for straight corner transitions. These settings help produce consistent offset geometry.

All commands Updated 30 October 2026
Continue learning
View all commands

Ready to switch to GstarCAD?

Get personalized advice on licensing, migration, and deployment for your business.

Contact us Buy now

No obligation — reply within 24h

Your Cart

Subtotal

Price does not include local taxes or duties.

Proceed to Checkout

Cookie preferences

Choose which cookies you want to allow. Essential and payment cookies cannot be disabled as they are required for the site to function.

Essential

Required

Core functionality including authentication, shopping cart, and language preferences.

Payment

Required

Required for processing payments securely through Stripe and PayPal.

Analytics

Help us understand how visitors interact with our site to improve the experience.

Marketing

Used to deliver relevant advertisements and measure campaign performance.

Functional

Order attribution and traffic source tracking to help us understand how customers find our store.