What does DIMJOGGED do?
DIMJOGGED creates a jogged radius dimension for a selected circle or arc. It is particularly useful when the true centre of a large-radius curve is far outside the visible drawing area. Instead of extending the dimension line all the way to the actual centre, you specify a convenient centre location override and add a jog to indicate that the displayed origin is not the true centre.
How to use the command
- Type
DIMJOGGEDor its shortcut DJO, then press Enter. - Select the circle or arc that you want to dimension.
- Specify a convenient centre location override.
- Position the dimension line and radius text.
- Specify the location of the jog symbol on the dimension line.
- GstarCAD creates the completed jogged radius dimension.
Command: DJO ↵
Select arc or circle: select large arc
Specify center location override: pick convenient point
Specify dimension line location or [Mtext/Text/Angle]: pick location
Specify jog location: pick jog position
Key DIMJOGGED options
Practical example: dimension a large architectural arc
Suppose a curved façade has a radius of 12000 mm, but its true centre lies far outside the current drawing detail. Start DIMJOGGED, select the arc and place the centre override near the visible geometry. Position the radius text clearly, then specify the jog location. GstarCAD displays the actual radius while the jog makes it clear that the graphical dimension origin does not represent the true centre.
Tip
Use DIMRADIUS when the real centre can be shown normally. Use DIMJOGGED when displaying the full radius line would make the drawing difficult to read. The jog angle can be controlled with the DIMJOGANG system variable.