What does DIMDIAMETER do?
DIMDIAMETER creates a diameter dimension for a selected circle or arc. The command automatically measures the full diameter and creates a dimension line with the appropriate diameter value. It is commonly used for holes, circular components, shafts and other curved features that need to be specified by their complete diameter rather than their radius.
How to use the command
- Type
DIMDIAMETERor its shortcut DDI, then press Enter. - Select the circle or arc that you want to dimension.
- Move the cursor to preview the diameter dimension.
- Position the dimension line inside or outside the selected geometry.
- Click to place the completed diameter dimension.
Command: DDI ↵
Select arc or circle: select circle
Specify dimension line location or [Mtext/Text/Angle]: pick location
Key DIMDIAMETER options
The measured diameter is calculated automatically from the selected geometry, while the available options control the displayed dimension text and its orientation.
Practical example: dimension a circular hole
Suppose a mechanical plate contains a circular hole with a diameter of 50 mm. Start DIMDIAMETER, select the hole circle and move the cursor to a clear position outside the geometry. Click to place the annotation. GstarCAD measures the circle and creates a diameter dimension showing the complete 50 mm diameter according to the current dimension style.
DIMDIAMETER or DIMRADIUS?
Use DIMDIAMETER when the complete diameter of a circle or arc needs to be shown. Use DIMRADIUS when the drawing should specify the radius instead. Both commands use the current DIMSTYLE settings for text, arrows and dimension appearance.