What does DIMCORD do?
DIMCORD labels a selected point directly in the drawing with its coordinate values. It is particularly useful for site plans, survey drawings, setting-out plans and other drawings where X and Y coordinates need to remain visible as annotations.
The coordinate label uses a leader connected to the selected point. Its scale, text height and other display settings can be adjusted before placing the annotation.
How to use the command
- Type
DIMCORD, then press Enter. - Check the current scale and text height displayed in the command line.
- Select the point whose coordinates you want to label.
- Specify the direction and position of the coordinate label.
- Repeat the process for additional points or press Enter to finish.
Command: DIMCORD ↵
Current settings: dimension text scale<1.0>, dimension text high<3.0>
Specify the coordinate point<Exit>: select point
Specify the coordinate direction Or [Change Parameter(Q)]<Enter>: pick label position
Key DIMCORD options
The parameter settings control the appearance and behaviour of the generated coordinate labels.
Practical example: label a survey point
Suppose a site plan contains a setting-out point at coordinates X=4250.0 and Y=3150.0. Run DIMCORD and select the point.
Move the cursor away from the point and place the coordinate label where it remains clearly readable. GstarCAD creates X and Y coordinate information connected to the measured point by a leader.
Tip
If the coordinate text is too small or too large, enter Q during DIMCORD and adjust Scale or Text Height. GstarCAD remembers the latest values for subsequent labels.