What does CHAMFEREDGE do?
CHAMFEREDGE creates a bevel along selected edges of 3D solids and surfaces. Instead of leaving a sharp corner between two faces, the command creates a flat chamfer whose size is controlled by two distances.
You can chamfer individual edges, select several edges belonging to the same face or apply the operation to a complete edge loop.
How to use the command
- Type
CHAMFEREDGE, then press Enter. - Choose Distance if you need to change the current chamfer dimensions.
- Enter the first and second chamfer distances.
- Select the edge or edges that you want to bevel.
- Press Enter to accept the selected edges and complete the chamfer.
Command: CHAMFEREDGE ↵
Select an edge or [Loop/Distance]: Distance ↵
Specify distance 1: 5 ↵
Specify distance 2: 3 ↵
Select an edge or [Loop/Distance]: select edge ↵
Key CHAMFEREDGE options
The command provides controls for setting the chamfer size and selecting individual or grouped edges.
Practical example: bevel the edge of a solid block
Suppose you have a rectangular solid measuring 100 × 60 × 30 mm and want to bevel one of its top edges. Run CHAMFEREDGE, choose Distance and enter 5 mm for the first distance and 3 mm for the second.
Select the required edge and confirm the operation. GstarCAD replaces the sharp corner with a flat bevel whose position is determined by the two specified distances.
Tip
Use CHAMFEREDGE when you need a flat bevel. Use FILLETEDGE when the transition between adjacent faces should be rounded instead.