What does BREAK do?
BREAK splits a selected object by specifying two break points and removes the portion between them. It is useful for creating gaps in lines, arcs and other supported geometry, for example when making an opening for a door, symbol or other drawing element. The command can also split an object at a single point without leaving a gap.
How to use the command
- Type
BREAKor its shortcut BR, then press Enter. - Select the object that you want to break. The point used to select the object becomes the first break point by default.
- Choose First point if you want to specify the first break point more accurately.
- Specify the first break point on the object.
- Specify the second break point. GstarCAD removes the portion of the object between the two points.
Command: BR ↵
Select object: select line
Specify second break point or [First point]: F ↵
Specify first break point: pick first point
Specify second break point: pick second point
Key BREAK options
BREAK has a simple workflow, but the position of the break points determines the final result.
Practical example: create a doorway opening
Suppose a continuous wall line needs a 900 mm opening for a doorway. Start BREAK, select the wall line and choose First point. Snap to one side of the required doorway, then specify the second break point 900 mm away along the wall. GstarCAD removes the section between the two points, leaving a precise 900 mm gap while keeping the remaining parts of the wall line.
Tip
For an accurate break, use First point instead of relying on the original object-selection point. To divide an object without creating a gap, specify the first break point and enter @ when GstarCAD asks for the second point.